InspectorTools

Measuring made easy � in a handy size!

Minimal size and simple operation are the defining characteristics of the basic model. Shortcut keys for addition, subtraction, area and volume mean that measuring could not be simpler. Minimum and maximum functions have also now been incorporated. You could even say that this compact unit is a joy to use. Reliable, simple and � from now on � always to hand when you need it.

Reliable, simple and � from now on � always to hand when you need it.

Scope of Delivery:

Leica DISTO� A3

Holster

Hand loop

Batteries

Manual

Safety instructions

Producer certificate

Feature: Measuring range of 0.05 up to 100m (0.16 up to 325ft); typ. accuracy � 3mm (� 0.12in)

Benefit: Fast and accurate measurement

Feature: Power Range Technology�

Benefit: Allows measuring of long distances (approx. 80m) without target plate

Feature: Handy size

Benefit: Fits any pocket

Feature: Shortcut keys

Benefit: Simple to operate

Feature: Continuous measurement

Benefit: Measuring of minimum and maximum distances, e.g. for measuring a room diagonal

Feature: Integrated spirit-level function

Benefit: Horizontal alignment

Feature: Illuminated display

Benefit: Measurement readings are visible even in the dark

Feature: Foil keypad

Benefit: Resistant to water spray and dustproof; easy to clean

Feature: Targeting assistance

Benefit: For lining up targets over longer distances and in open spaces

Frequently Asked Questions

What are the most favourable measuring conditions? To achieve an optimal measuring result, the target surface should have good reflecting characteristics (white, beamless, smooth). Furthermore the light conditions are crucial for the measurement. In the best case the target surface is not exposed to direct sunlight.

Can I measure on transparent surfaces? No, measuring on or through transparent surfaces (e.g. window panes or water surfaces) can cause measuring errors. For transparent materials or liquids trial measurement have to be performed.

Can I measure inclined or round surfaces? Yes, if there is enough area on the target surface for the laser spot, the measurement can be performed as well.

At short distances, I always receive the error signal 256. If the target reflects too much, the Leica DISTO TM may receive too much return signal. Use the grey side of a target plate or a sheet of paper and take another measurement.

At longer distances, I always receive the error signal 255. If the target reflects too little, the DISTO may receive too little return signal. Use a target plate (brown side) to increase the reflection. Additionally we recommend using a tripod for longer distances. This way you keep the Leica DISTO TM still and you improve the accuracy.

I have problems to see the red laser dot, how can I aim at a target? To identify the laser dot easier, use our red laser glasses. The instrument can measure even if the human eye cannot see the laser dot. If you are aiming with Leica DISTO TM A3, use the targeting aid to estimate the area where the laser is aiming the target. If you are working with Leica DISTO TM A5, use the integrated viewfinder to aim at the target. The crosshair indicates the area where the laser strikes it.

How can I perform an indirect measurement? The indirect distance is calculated by using the Pythagoras theorem. The accuracy cannot be compared with an exact direct measurement; it is rather an approximation. To obtain the best possible result, we recommend to hold the center of the rotation of the Leica DISTO TM steady (e.g. with a tripod) and to use the minimum measurement function when a perpendicular measurement is required in the Pythagoras function.

What is the accuracy of the instrument? The specified accuracy is valid for 30m at normal light conditions. Beyond that distance, additional errors may occur up to a maximum error of the accuracy of +/- 10 mm.

What does �typ. and max. accuracy� mean in our specifications? Typ. (typical) accuracy means the accuracy under average measuring conditions, white target and daylight. The statistical confidence is 95% (2 times standard deviation). Max. (maximum) accuracy is the accuracy which occurs under unfavourable conditions. Accuracy decreases when measuring long distances, measuring to poorly reflecting targets.

Checking measuring instruments (e.g. according to ISO 9001). How can I proceed? You can perform the measurements required to check the measuring accuracy of the Leica DISTOTM in accordance with the stipulations of your quality management yourself. Select a known test measuring distance of approx.1 to 10 m that remains permanently at the same length and is easily accessible (window sills, widths of rooms). Perform 10 measurements. The length of the test measuring distance must be determined with an appropriately exact measuring tool, based on a national standard, (e.g. a class I or II steel tape) Calculate the average value of the measurements and determine the standard deviation (Excel functions). Your Leica DISTO TM meets the specified accuracy, if the average value of the measured results remains � 2 times standard deviation within the specified accuracy tolerance (set distance � typical accuracy). A Leica DISTO TM that fulfills this test will operate over its entire range as specified in the Operating Manual. Should your usual measuring distances deviate strongly from the sinlge test measuring distance, then we recommend performing the above procedure over several differing distances.

Is the laser beam harmful? No. Our instruments belong to laser class II, which means that normally your eyes are protected by aversion responses including the blink reflex.

What is the warranty for my Leica DISTO TM? Leica Geosystems AG offers a warranty of 24 months as of date of purchase. Should you have eventually a problem within that time, your dealer will exchange it. Customer oriented, fast and unbureaucratic.

Product Family Brochure

Small but robust Fits perfectly into the pocket and useful for each application

Simple to operate Due to the shortcut keys addition and subtraction, as well as surface and volume calculations could not be easier

Integrated spirit-level function Horizontal alignment made easy, such as for plug sockets